Seth Thomas Ships Clock, dating and questions…

Based upon a preliminary global assessment in which the USGS is participating, discovered and undiscovered land-based copper resources are expected to exceed 3 billion metric tons. Geological Survey, Until well into the s, most copper used in the U. The United States was the world’s largest copper producer until ; beginning in , Chile became the world’s leading copper producer. Excluding wire production, most of which uses newly refined copper, nearly two-thirds of the amount used by copper and brass mills, ingot makers, foundries, powder plants and other industries comes from recycled scrap. Copper Fact 3 Almost half of all recycled copper scrap is old post-consumer scrap, such as discarded electric cable, junked automobile radiators and air conditioners, or even ancient Egyptian plumbing. Yes, it’s been around that long. The remainder is new scrap, such as chips and turnings from screw machine production. Copper Fact 5 Man has been recycling copper throughout history.

Antique Farm Bells

Bead line – a raised line around the bell which is both decorative and functional. Clapper – the small part that hangs inside the bell and strikes the sides when rung. Crown – the piece at the top of the bell that allows it to be hung from a chain or rope.

Balance Toy Court Jester BALANCE TOYS Balancing toys were popular in the 19th century. Dating back to ancient China and India, where they were most often carved from soft wood, the western balancing toys were traditionally made from tin or metal. Illustrations of balancing toys can be found in educational literature from the 18th century. The physics governing the movement of such toys.

Seth TThomas Ships Clock, dating and questions Welcome to the mb, we were all newbies once and is the place for you and anyone else interested in clocks. Don’t feel neglected if you didn’t get a reply immediately – none of us know everything but you will find that most people will be glad to share what they do know.

To get the ball rolling: I’m afraid I can’t tell you nearer than that but there may well be a Seth Thomas expert who can date your clock more accurately. I don’t quite understand the question about the hour hand not moving. Do you mean that when you manually moved the minute hand round, the hour hand stayed where it was?

This would seem to point to the hand being rather loose on the arbor, yet it seems to move when the clock is running? Maybe I have misunderstood the question. Although this clock is in the shape of a ship’s wheel, I am assuming that it is not a ‘ship’s clock’ in the sense of striking the watches? I am therefore assuming that it should simply strike the hour and half hour in the ordinary way.

The Guide to HO Steam Locomotives

Dating Bells Early bells late s through about The very earliest North American horse bells date to the s and s. These incredibly rare bells have been uncovered by archaeologists at the sites of early European settlements along the eastern seaboard of North America and along the paths of Spanish expeditions through Mexico and the southwestern and southern United States.

The oldest sleigh bells the average person is likely to find typically date from the late s through about

Timesavers – Bells,Gongs,Chime Rods,Hammers & Related. All componentry for chiming mechanisms. Select a Sub-Category. Bells (23) Cast brass, iron & steel bells With a slotted brass mounting screw that has a mm thread diameter. Regularly $/each.

Paul, MN Copper and its alloys, including brass and bronze, are among the oldest metals used by mankind. Dating back to ancient times, these metals gained wide use due to the ease with which their components were produced from ores. Copper also occurs in its native form in many places on our planet. Today, these metals continue to have many uses and have excellent value for recycling. At our Minneapolis metal recycling company, we actively purchase scrap copper, brass, and bronze scrap from sellers, both individual and industrial.

We buy all forms of these metals and pay top prices for them based on current market conditions. Depending on the type of metal and its condition, these metals are in high demand. As an excellent conductor of heat and electricity and as a material for plumbing, it can be found in almost every building and in many other places.

How to Identify Brass Antique Markings

Click on a box to sort the full inventory of instruments available by category Today’s Featured Horns Getzen Custom Model AFR Trombone I must admit, this is not a normal Getzen to me, it holds a special place in my heart this is actually my first professional trombone that my parents bought for me in at Zeps Music in Burbank. Oh the things I promised my parents to get them to purchase this trombone for me its something I will never forget, and actually a memory I still recall when I have young students come into my shop to purchase a new trombone with their parents.

I got into college on this trombone and played some of my most memorable performances in my young career on it. I sold this trombone in in order to fund my first Conn 88H after I fell in love with the Conn sound. It’s been well loved since then, serving its second owner well, who recently traded it in here at The Brass Ark to get something newer.

Shop modern, vintage and antique style metal doorbells. Traditional and mechanical doorbells in stock. Free Shipping on orders $50+. Crafted from solid brass, this set is built to endure years of repeated use. View Product [ x ] close. Bachelet Egg & Dart Plate with Graduated Round.

Sheet-metal crotal bell 13th th century Alongside the early cast crotals, copper and copper-alloy bells of sheet metal were produced. On the very earliest of this type, the loop was made of circular-section wire, which was inserted through a small hole in the top of the bell and its ends splayed in the manner of a modern split-pin.

Slightly later, a narrow strip of sheeting was used instead of wire, and was either fitted in the same way, or formed into a ring and soldered to the top of the bell as on the example illustrated. Bells of this type have been recovered from secure contexts that span the date range circa mid th to mid th century. They are also found in a wide range of sizes, at least from 13mm to 34mm diameter, suggesting a variety of different uses. Around the end of the 13th century, a new type of white-metal pewter and tin crotal bell, cast in one piece, appears.

Birmingham Brass Makers

Painted brick houses I have written another painted brick post with 15 real life examples of painted brick houses and the colors used on the trim and paint, please see link at the bottom of this post. For many years, I dreamed about building a brick Georgian house. I love the symmetry and order of a classic Georgian house.

Aug 21,  · Seth Thomas Ships Clock, dating and questions Discussion in ‘Clock Repair The bells work as they should, just coming at 17 minutes after the hour and 47 minutes before the hour. Sounds like if I move the minute hand as suggested, this issue would be resolved. It looks as if there is a brass nut in the middle between the minute and.

It used to be thought that the earliest metal thimbles found in Britain dated to the Roman period, but the present view is that they are all very much later. In fact, although examples dating as early as the ninth or tenth century AD have been found at Corinth and in Asia Minor, the use of thimbles in this country did not become widespread until the fourteenth century. They often have one or two circumferential grooves at their base, but only a very small proportion of them have any other form of decoration.

Until the beginning of the fifteenth century, the majority were of a shallow cup shape, reflected by their present-day nicknames of acorn-tops, skeps or beehive thimbles. A 14th century thimble hammered from sheet metal as indicated by internal lapping , but nevertheless with a small hole in the crown. UKDFD One purpose of the hole may have been to facilitate support of the core during the casting process, but hammered thimbles with this feature are also known Fig.

In any case, the pierced crown, which is said to be indicative of English manufacture, is not found on thimbles produced after about the end of the fourteenth century. Tonsured crowns, however, persisted throughout the fifteenth and into the early sixteenth century.

Especially Heinous: 272 Views of Law & Order SVU

It was situated in the forest area of southern Nigeria, miles southeast of Ife. The art of bronze casting was introduced around the year The kingdom reached its maximum size and artistic splendor in the 15th and 16th century. For a long time the Benin bronze sculptures were the only historical evidence dating back several centuries into the West African past, and both the level of technical accomplishment attained in bronze casting, as well as the monumental vigor of the figures represented, were the object of great admiration.

The oldest sleigh bells the average person is likely to find typically date from the late s through about Very few — perhaps % — of all of the antique sleigh bells on the market are this old.

The development of a serial number list has been very difficult because of the lack of official records. White kept very detailed records but when the company was sold to the Seeburg Corporation all official records were destroyed. When looking up the age of your instrument, complete the following steps: Find your instruments catalog page and year that the catalog was made. Pay special attention to the small details on your instrument because most artists drawings account for unique changes and features.

Compare your findings to the serial number list. Please keep in mind that most catalogs were dated on the back and should be trusted more than the serial number list. Early instruments will have a “lion head” by the serial numbers and are engraved “The King”. In the company was incorporated and “Co” was added to the engraving of all instruments, before the engraving read simply as “H.

White introduced Sterling Silver bells to his instruments. In “Silver Tone” engraving was changed to read “Silversonic”. After , all instruments were manufactured in Eastlake and engraved with “King Musical Instruments.

9 Different Types of Trumpets (Plus Interesting Facts)

Choosing the right antique brass, whether for personal use or as a gift, can be a daunting task. With thousands of pieces to choose from, understanding the origin and terminology related to different kinds of antique brass is essential in making the right decision. While individual pieces and manufacturers should be researched and evaluated for things like rarity and investment value, this guide is designed to give buyers a better idea of what is available and how to choose the best piece at the best price.

That way, the buyer can get the most for his or her money. What Is Antique Brass? Traditionally, an item is considered to be an antique one hundred years after it was made.

Dating to January 6,, the pattern of this single bronze knob is # by W. Gorman. Heavily worn condition. Steel mount with brass bells. 14″W x 3″H x 3″D. $ The Brass Knob Architectural Antiques is a leading architectural salvage company providing.

There are usually two key questions that always seem to be asked when presented with an antique clock. When was my clock made? What is my clock worth? This third question is: Is my clock authentic and original in all respects? This is an important question, and one that the owner does not seem to understand, nor its relevance to the first two questions.

The easy answers to these questions, and the ones that are far too frequently employed, are to simply jot down the name of the maker, usually engraved on the dial or chapter ring, then to look in any one of the many books of makers. The maker will likely be listed with a working date and possibly other useful information. These questions apparently can be answered quickly for some, thus leaving the owner with a date range and usually an over-inflated price.

In terms of originality however, the astute specialist would quickly question a marquetry, walnut and ebony cased clock with a painted dial.

Used Instruments

Don’t worry — your e-mail address is totally secure. I promise to use it only to send you Clock Collecting Tips. There are so many styles and types of clocks, made by so many clock makers and from so many countries, that I was totally lost. Over many years, I have learned a lot. I have concentrated on the American clock companies for my collection, so there is much for me to learn about clocks from outside the US. The question I get most from the comment form on this web site is:

Duchy Brass has now moved to Illogan! The showroom is still a work in progress but as always visitors welcome by prior appointment. New address is: Methodist Church Hall, Paynters Lane, Illogan, Redruth, Cornwall, TR16 4DS.

Birmingham – Home of Metal – This page includes a selection of manufacturers of brass and copper items mostly for domestic use. During this time there were about 3, makers whose names appear somewhere in the annual directories. The names mentioned are mostly those who marked their products, some of which may still be found second hand. Other names have come to light as I skimmed through the books of Registered Designs at the National Archives.

If more information is needed on particular firms the best initial source will be the Birmingham Central Library. When a year date is shown it is the year of the commercial directory used and is just one of the years in during which the company operated.

What Are Those Bells That JP Bouvet Uses on his Hihats?